- Navigation & GPS[10]
- Diagnostic Tools[1]
- Computer Cables & Connectors[7]
- CPUs[1]
- Laptop Batteries[1]
- Modems[10]
- Motherboards[2]
- Doorbells[10]
- Card Readers[2]
- Other Accessories & Parts[7]
- Digital Photo Frames[6]
- Other Consumer Electronics[10]
- Connectors[1]
- Sensors[2]
- EL Products[1]
- Electronics Production Machinery[3]
- Electronics Stocks[9]
- Other Electronic Components[4]
- Multilayer PCB[1]
- Impellers[1]
- Pumps[8]
- Oil Paints[10]
- Printer Ribbons[10]
- Video Door Phone[2]
- Alarm[2]
- Antennas for Communications[6]
- Communication Cables[10]
- Fixed Wireless Terminals[10]
- Repeater[1]
- Telecom Parts[10]
- Wireless Networking Equipment[10]
- Other Telephone Accessories[1]
- Other Mobile Phone Accessories[4]
- Contact Person : Ms. He angel
- Company Name : Shenzhen Shanhai Technology Ltd.
- Tel : 86-755-83657655
- Fax : 86-755-83612920
- Address : Guangdong,Shenzhen,Room 620 ,Yutian building ,Futian district ,shenzhen , China
- Country/Region : China
- Zip : 518032
Telit Evaluation Kit EVK2 for GSM/GPRS, UMTS/HSDPA and CDMA module
Related Product Searches:Telit Evaluation Kit EVK2 for GSM/GPRS, UMTS/HSDPA and CDMA module,High Quality,Evaluation Kit, Telit, EVK2
Telit Evaluation Kit EVK2:
The Telit Evaluation Kit (EVK2) provides a robust, future-proof and flexible environment for rapid development of applications for the full range of GSM/GPRS, UMTS/HSDPA and CDMA module families, dramatically reducing time-to-market.
The kit is comprised of a motherboard, and an adapter board in which the relevant module is connected. This concept allows the EVK2 to be used across various form factors and product generations, both present and future.
The motherboard includes the basic interfaces, such as power input, SIM card holder, audio monitor outputs, RS-232, and USB 1.1, as well as a Reset button and power switch. The motherboard represents the recommended reference design for the module's peripheral circuitry. Jumper blocks on the motherboard define the routing of the serial interfaces, audio signals, and power supply. The PC or DTE controlling the module over the AT-command interface can be connected via USB or RS-232.
Adapter boards are available in different models to allow development for the desired module family (board-to-board or BGA solder). The set of basic interfaces found on by the motherboard. The set of interfaces specific to the module (e.g. antenna, general purpose inputs/outputs (GPIO), ADC/DAC, UART etc.) is found on the adapter board for connection to the user’s application, extension boards, or other development tools and measuring equipment.
Telit Evaluation Kit EVK2 for GSM/GPRS, UMTS/HSDPA and CDMA module
